Aervy Wifi Extender Setup

Indeed, the Aervy Wifi extender setup involves the entire configuration process and optimization of your wireless range booster. Mainly, the extender setup is performed to obtain an extended network range and wide wireless coverage. However, setting up your Aervy extender is a quick and simple procedure that a non-tech user can also do easily.

So, if you own this device and want to accomplish the Aervy extender setup in simple ways, then you must walk through this guide. In addition, you gain deeper insights into the key requirements and effective ways to carry out this process. So, let’s move further!

Aervy Wifi Extender Setup​

Essential Requirements For the Aervy Wifi Extender Setup

Certainly, there are some basic things you will need while configuring your Aervy range booster. So, below are the key requirements for the Aervy Setup:

Aervy extender
and router

internet
connection

Accurate IP
address

admin
details

Computer/
laptop

Ethernet
cables

How to Perform the Aervy Setup In Easy Ways?

Generally, there are two ways to set up your Aervy wifi extender, i.e., via the WPS button and web browser method. Each method has a different set of instructions to complete the Aervy WiFi extender configuration process. So, here are the detailed steps for both methods:

Aervy Wifi Extender Setup​ Via Web GUI

Web GUI Method For the Wifi Extender Setup

  • Initially, confirm that your wifi range extender is turned on.
  • Now, connect your laptop or computer to the existing router’s network.
  • Hereon, open any web browser and type the 192.168.10.1 IP address in the browser bar.
  • After that, log into your Aervy admin panel using valid details.
  • Then, you enter the smart setup wizard of your extender.
  • Here, navigate to the Wireless section to modify the SSID and password.
  • Enter a new and unique SSID and password in WPA2-PSK security mode to secure your network.
  • Further, visit the Advanced Settings and configure your device as per your preferences. 
  • At last, save all the settings and your extended network is ready for use.

WPS Button Method to Configure Aervy Range Booster

  • Firstly, plug your range extender into the power outlet and wait for the LED to turn solid green.
  • Now, locate the WPS button on the bottom or back side of your range extender.
  • Then, press this button on your wifi router to initiate this configuration process.
  • Within 2 minutes, press the WPS button on your range extender and the power LED starts blinking.
  • After that, wait for the LED to turn the blinking LED to solid green.
  • Now, release the button on the devices, and the connection is successfully established.
  • Reconnect your device to an extended network once it finishes rebooting.
  • Finally, your Aervy setup ends here.
Aervy Wifi Extender Setup​ WPS Button

Struggling With the Aervy Extender Setup? Here Are the Fixes!

Although the Aervy range extender setup procedure is very simple, still some users often get stuck during this process. Mainly, they face issues due to an unstable internet connection, wrong admin credentials, signal interference, power outages, etc. Therefore, this section presents you with some effective tips to fix these issues, as given below:

  • To begin with, check if your devices have enough power supply and have a proper cable configuration.
  • Additionally, use the ethernet cables to stabilize your internet connection.
  • If you are facing frequent network connectivity issues from the ISP side, then contact them immediately and resolve them.
  • Remove all the network barriers like mirrors, heavy furniture, sheer curtains, etc. that restrict the wifi signals.
  • If you can’t remove these things, then reposition your router and extender to a central location. 
  • Additionally, double-check the admin credentials and IP address before logging into your networking device.
  • Carefully configure and save all the settings on your range extender.
  • Regularly check the firmware updates on your extender and download the available updates with the latest version.
  • Moreover, do not download an outdated or incompatible firmware file.
  • Erase all the unwanted browser data including cookies, cache, and history from your browser, and keep it updated.
  • If your current browser does not support the given IP address, switch to another browser. 
  • Power cycle your device to get rid of the technical glitches and bugs within your device.
  • Follow the proper instructions and accurate methods to configure your device.
  • When nothing works well, then factory resetting your range extender is the final call. To know the complete procedure to reset your device to its default settings, drop us a line!

How to Access Aervy Wifi Extender as an Access Point?

Aervy Wifi Extender Setup​

Moreover, if you want to experience an extended network range, then you can configure your repeater as an access point. It will not only help the users experience a string and extended wireless signals, but also eliminate the need for additional devices. So, here is the detailed process to set up your networking device as an access point:

  • To begin with, connect your computer to the home wifi network.
  • Then, visit the 192.168.10.1 web interface of your Aervy range booster.
  • Further, log into your admin portal using the required details.
  • After that, you land on the smart setup wizard of your networking device.
  • Then, navigate to the Wireless or Network Settings.
  • Hereon, choose the ‘Access Point Mode’’ option as an operating mode.
  • Then, follow the instructions given on the screen for further configuration.
  • With this, you can access and connect your range booster as an access point for better coverage.

Overall, this detailed guide reflected well on the complete Aervy Wifi Extender Setup procedure. For more insights regarding the Aervy devices, visit our website!

FAQs

You should update the Aervy extender’s firmware whenever a newer version is available. Ideally, you should update it every one or two months.

Not necessarily, because you can configure your Aervy extender via the WPS button method too. But, using the web interface method, you need to first log into your extender’s admin portal.

In this case, you need to check your router’s compatibility with the Aervy extender. Additionally, you could try relocating your networking device for better signals.

Yes, you can use any router to set up or configure your Aervy repeater.

Scroll to Top